pH MASTER

pH Buffer and sticker.

CHARACTERISTICS

pH Master is a special liquid NP fertilizer created to support and improve the efficacy of pesticide solutions and fertilizing mixtures.

EFFICACY

When added to spray solutions, pH Master acts as:

  • Acidifying agent: lowers the pH to the optimal values required by plant protection products and fertilizers;
  • Indicator: gives solutions a specific colour that changes in relation to the achieved pH;
pH 4,0 pH 4,5 pH 5,0 pH 5,5 pH 6,0 pH 6,5 pH 7,0
  • Adhesive-sticker: allows nutrients and plant protection solutions to form a thin layer on foliar surfaces to increase adhesion, improving the wettability of vegetation and increasing the penetration of active substances;
  • Dispersing agent: reduces the sedimentation of added products in mixtures.

COMPOSITION

% w/w % w/v
Ureic (N) Nitrogen 3.1 3.8
Phosphoric anhydride (P2O5), water soluble 23.7 28.7

SPECIFICATION

Density 1210 g/L – pH 1 – 2

STATE

Liquid.

APPLICATION

Foliar Spray

DOSES, METHOD, TIMING OF APPLICATIONS

Doses are referred to each application:

The pH of spraying solutions must be corrected before adding the chemical compounds: add the product to the water while mixing (about 60-80 ml in 100 litres of water to reach pH = 6-6.5). The dose will change in relation to the desired pH and to the hardness of the water. To check the obtained pH, simply compare the colour of the solution to the colour scale shown on the label. Add more product, if required, 20 cc at a time, until the desired pH is obtained.

PACKAGING

pH Master 1 L bottle (carton: 16 x 1 L)
6 L can (carton: 2 x 6 L)

WARNING

Avoid mixing with highly alkaline compounds, mineral oils, sulphur, calcium, copper-based chemical compounds.

DOWNLOAD

pH_MASTER_safety_sheet
pH-MASTER_product_sheet